Maintenance of the solenoid valve: The cooling of the solenoid valve, the spool of the solenoid valve has been invalid, Wholesale beer brewing equipment the valve core sealing is invalid, and the damage of the electromagnetic coil may result in the failure of the solenoid valve.

Power-on reducer injection 46 # machine oil, tu on the motor cover with hand to tu the blade check No card-free phenomenon, mixing paddle has no wiper wall, cleaning the dirt in the kettle, can be tued on. It should be installed on a sturdy, flat workbench, the work station is highly determined according to the usage, and the equipment and the workbensors should have a certain space (& ge; 360cm) so that Installation and post-maintenance!

Tu off the solenoid valve, and the exit has a cooling water leak, and the valve core seal fails or fragment blockage the spray. A high quality winemaker is indispensable, in which the most important thing in the equipment is the fermenter, it can be said to be the key to wine. Trouble judgment: The circulating pump is operating normally, the cycle line is normal, and the temperature drop is not only the greatest reason. With the spread of German beer culture, it has gradually become a very important part of our daily lives.

Bearing replacement: 1 - 2 years after use, bearing noise is increased, or the agitating shaft is significantly swing to replace the bearing. During the installation process, the air dispenser should be re-filled, replace the fill hole in time, such as replacing the bottom valve, replace the bottom valve gasket. The transmission shaft is required to be vertical at the time of installation, no verticality (inclination) is not greater than 1/1000 ~ 3. Depending on the water injection switch, the water injection switch indicator is on, the end of the solenoid valve has no magnetic, no cooling water discharge, and the coil is broken.

امتیاز بدهید :

The selection of the large exhaust valve of the solid fermentation tank is a difficult problem for researchers when choosing the large exhaust valve of the solid fermentation tank; because the diameters of the inlet and outlet pipes required for the mass-produced large tanks are relatively high Large, generally more than 10 inches, at this time, the price of choosing a single-seat control valve is relatively high, the investment is relatively large, and only a better control effect is obtained. It is difficult for a single-seat valve to meet the requirements of sterility.

Generally, a fire-proof butterfly valve + positioner can be used to form a regulating butterfly valve for selection. The structural characteristics of the stainless steel mixing tank are generally made according to the adaptability of its functions, and different structures will be made according to different functions, that is, the function determines the structure. The stirring tank is composed of a stirring tank body, upper and lower ends, agitators, supports, transmission devices, shaft sealing devices, etc., and can also be equipped with heating devices or cooling devices according to process requirements.

The materials selected for the stirring tank body, stirring tank cover, agitator, CIP cleaning systems factory and shaft seal can be made of carbon steel or stainless steel according to different process requirements. The stirring tank body and the stirring tank cover can be connected by flange sealing or welding. The stirring tank body and stirring tank cover can open process pipe holes such as feeding, discharging, observation, temperature measurement, pressure measurement, steam fractionation, and safe venting according to the process requirements.

The upper part of the mixing tank cover is equipped with a transmission device (motor or reducer), and the agitator in the mixing tank is driven by the transmission shaft. The shaft sealing device can adopt various forms such as mechanical seal or packing (determined according to user needs).

Due to the different production process requirements of users, the agitator can be configured in various forms such as paddle type, anchor type, frame type, and spiral type. If you have other requirements, you can contact our factory for additional design and production

امتیاز بدهید :